manualshive.com logo in svg

Johnson Controls York AYK550, Руководство пользователя

Поделиться
Скачать
Johnson Controls York AYK550 Скачать руководство пользователя страница 26

 

YORK, A Johnson Controls Company

$

6$( ?

'&` h

 The very first time the drive is powered up, it is in the auto control 

(AUTO) mode, and is controlled from the Control terminal block X1.

To switch to hand control (HAND) and control the drive using the control panel, press 
and hold the 

 or 

 button.

•

Pressing the HAND button switches the drive to hand control while keeping the 
drive running.

•

Pressing the OFF button switches to hand control and stops the drive.

To switch back to auto control (AUTO), press and hold the 

 button.

 3`,2`&44h

To start the drive press the HAND or AUTO buttons, to stop the 

drive press the OFF button.

!4 =h

To modify the reference (only possible if the display in the upper right 

corner is in reverse video) press the UP or DOWN buttons (the reference changes 
immediately). 

The reference can be modified in the local control mode, and can be parameterized 
(using Group 11 reference select) to also allow modification in the remote control 
mode.

%@,23

To change the parameters, follow these steps:

Select MENU to enter the main menu.

F

Select the Parameters mode with the UP/
DOWN buttons, and select ENTER to 
select the Parameters mode.

   

Q

Select the appropriate parameter group 
with the UP/DOWN buttons and select 
SEL

   

]

Select the appropriate parameter in a 
group with the UP/DOWN buttons. Select 
EDIT to change the parameter.

   

Press the UP/DOWN buttons to change 
the parameter value.

   

Содержание York AYK550
























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды