Johnson Controls York AYK550, Руководство пользователя

Страница: 76 / 279

.
YORK, A Johnson Controls Company
$
2_ 27&,,
This group defines the drive’s analog (current signal) outputs. The drive’s analog
outputs can be:
• Any parameter of the Operating Data group (Group 01).
• Limited to programmable minimum and maximum values of output current.
• Scaled (and/or inverted) by defining the minimum and maximum values of the
source parameter (or content). Defining an maximum value (parameter 1503 or
1509) that is less than the content minimum value (parameter 1502 or 1508)
results in an inverted output.
• Filtered
2_ 27&,,
23 =,2 ! 7 !2,2 4, #
1501
&&''#" kkkk Q&,,\<>
Defines the content for analog output AO1.
99 =
EXCITE PTC
– Provides a current source for sensor type PTC.
Output = 1.6 mA. See Group 35.
100 =
EXCITE PT
100 – Provides a current source for sensor type
Pt100. Output = 9.1 mA. See Group 35.
101…145 – Output corresponds to a parameter in the Operating
Data group (Group 01).
• Parameter defined by value (value 102 = parameter 0102)
146…199 – Not assigned.
1502
&&''* 32 =,2
- 0.0 Hz
Sets the minimum content value.
• Content is the parameter selected by parameter 1501.
• Minimum value refers to the minimum content value that will be converted to an analog output.
• These parameters (content and current min. and max. settings) provide scale and offset adjustment for the
output. See figure.
1503
&&''m 32 =,2
- 60.0 Hz
Sets the maximum content value
• Content is the parameter selected by parameter 1501.
• Maximum value refers to the maximum content value that will be converted to an analog output.
1504
**& >F> @ > @ ]> @
Sets the minimum output current.
1505
m*& >F> @ > @ F> @
Sets the maximum output current.
AO (mA)
AO CONTENT
P 1504 /
P 1502 / 1508
P 1503 / 1509
AO (mA)
AO CONTENT
P 1505 /
P 1504 /
P 1503 / 1509
P 1502 / 1508
P 1505 /
P 1511
P 1510
P 1511
P 1510