Johnson Controls Tyco KT-1, Руководство по установке, Страница: 50 / 56

Configuration
Use one of the following options to configure the controller:
• Configuring the controller using a browser
• Configuring the controller using the KT-Finder
Configuring the controller using a browser
Before you begin:
To configure cloud mode, factory default the controller.
1. Determine your connection to the controller and choose the appropriate network cable.
2. On your computer or mobile device, open a web browser.
3. In the address bar, type KT and the last six digits of the controller's MAC address in the
following format: KT-XX-YY-ZZ/ .
4. On the
KT-1 REGISTRATION
page, in the upper right of the window, select your preferred
language. English is selected by default.
5. To configure the correct mode, complete the steps in one of the following procedures:
- To configure the controller in stand-alone mode, complete one of the following
options:
- Configuring stand-alone mode using the activate now option
- Configuring stand-alone mode using the other ways to activate option
- To configure the controller with EntraPass, complete Configuring EntraPass mode .
- To configure the controller with Cloudvue, complete Configuring cloud mode .
Configuring stand-alone mode using the activate
now option
1. On the KT-1 REGISTRATION page, click Standalone .
2. On the Activate now tab, in the Customer information and Installer information fields,
enter the relevant information.
3. Click Activate now .
Configuring stand-alone mode using the other ways
to activate option
1. Log on to http://www.kantech.com .
2. Click Support and click Kantech Registration .
3. In the KT Standalone Registration area, click Click here .
4. On the KTWeb - Registration page, enter the relevant information and click Register . You
receive an activation code by email. Alternatively, contact Kantech technical support in your
region to get an activation code.
5. Return to the KT-1 REGISTRATION page and click Other ways to activate .
6. In the Activation code field, enter the activation code and click Activate now .
Configuring EntraPass mode
1. On the
KT-1 REGISTRATION
page, click
EntraPass
.
2. In the
EntraPass gateway
pane, in the
IP address
field, enter the IP address, or in the
Domain name
field, enter the domain name.
3. From the
Protocol
list, select
TCP
or
UDP
.
4.
Optional:
If you selected UDP, in the
Port
field, enter a port number.
5. Click
Save
.
Configuring cloud mode
1. On the KT-1 REGISTRATION page, click Cloudvue .
48
KT-1 One-Door Controller Installation Guide