Johnson Controls Tyco KT-1, Руководство по установке, Страница: 36 / 56

Installation
Use this section to prepare for the installation, to install the controller, and to connect all of the
components.
Preparing to install the controller
Before you install the controller, follow these guidelines:
• Install the controller indoors in a secure location with regular temperature and humidity
levels.
• Install the controller away from electrical and communication devices.
• Mount the KT-1 on a wall. Mount the KT-1-PCB in a cabinet.
• When you mount the controller, ensure that there is 9 in. (23 cm) of clear space around all
sides of the unit and a minimum of 13 in. (33 cm) of clear space in front of the unit.
• Do not locate the controller within 6.5 ft (2 m) of any high voltage equipment or wiring and
of any electrical equipment susceptible to generating electrical interference, within 3 ft (1 m)
of any telephone equipment or lines, and within 26 ft (8 m) of any third party transmitting
equipment.
• Locate the controller so that it is easily accessible to service the equipment. Provide physical
access by using keys on controlled doors.
For more information about preparing the installation, see Restricting physical access to the
controller .
34
KT-1 One-Door Controller Installation Guide