Johnson Controls Tyco KT-1, Руководство по установке, Страница: 17 / 56

Inputs
You can use the four onboard inputs for different functions depending on the mode of your
controller.
Stand-alone, EntraPass, or cloud mode
If your controller is in stand-alone, EntraPass, or cloud mode, you can use the inputs for the
following functions:
• Door contact
• Request to Exit Detector (T.REX)
• Trigger relay on events
EntraPass mode
If your controller is in EntraPass mode, you can also use the inputs for the following functions:
• Interlock
• External alarm system status: armed or disarmed
• External alarm system alarm: alarm or secure
• External alarm system zones
• Zone shunt: shunt a single zone or a group of zones, permanently or temporarily, to a secure
state on the same controller. See the following list of shunt methods:
- Zone shunt by another zone: when a zone in alarm is programmed to shunt another
zone or group of zones.
- Zone shunt on unlock: when a zone is temporarily frozen to its actual state, alarm or
secured, after an access is granted.
- Manual shunt: an operator can manually shunt a zone to a secure state.
- Disarmed door shunt: when the alarm system is disarmed, some zones may be
shunted to a secure state.
- Entry/exit delay shunt: when a user disarms or arms the alarm system and an entry or
exit delay prevails, some zones may be shunted to a secure state.
• Arming/disarming request
• Postpone arming request
Tamper switch
Use the screw at the bottom of the case, which locks the cover, to identify tampering of the KT-1
cabinet.
Lock outputs
The controller has two supervised onboard lock outputs. You can configure any onboard relay to
perform a locking function. For more information, see Connecting door locking devices .
Note:
Supervision is provided to detect only short-circuit faults; it does not detect open-
circuit faults.
Relay outputs
The KT-1 has two open collector onboard switch to ground relay outputs. The KT-1-PCB has two
Form C relays. For more information, see Connecting relay controlled outputs .
ioSmart card readers
The controller is compatible with ioSmart card readers, which provide security by using end-to-end
encryption between the ID badge credentials and the EntraPass software.
KT-1 One-Door Controller Installation Guide 15