Johnson & Johnson DePuy Synthes Small Battery Drive II, Руководство пользователя

Страница: 26 / 64

24 DePuy Synthes User Manual Small Battery Drive II
Attachments
Other Rotating Attachments
Warnings:
•
Grip the coupled Radiolucent Drive tightly when
switching on the power tool, particularly if the
power tool is held face down.
•
Only special 3-flute spiral drill bits can be used.
Your Depuy Synthes representative will provide
you with additional information on which drill
bits can be used.
Precautions:
•
To protect the gears, the Radiolucent Drive is
equipped with a slip clutch that disengages in case
of an overload and emits an audible rattling noise.
•
The following procedures can cause an overload:
–
Correcting the drilling angle when the cutting
edges of the drill bit are completely in the bone.
– Hitting the nail with the drill bit.
•
Drilling can be continued after having made the
following corrections:
–
Correcting the drilling angle: Remove the drill
bit until the flutes are visible and then restart
the drilling.
– Hitting a nail: Remove the drill bit until the
flutes are visible and re-aim the drill bit or
exchange the drill bit if necessary.
•
Handle the Radiolucent Drive with great care.
Do not allow contact between the drill bit and the
medullary nail.
•
Depending on the setting of the image intensifier,
a zone may appear in the rear of the Radiolucent
Drive that is not radiolucent. However, this does
not inhibit aiming and working with the device.