Johnson & Johnson DePuy Synthes Small Battery Drive II, Руководство пользователя

Страница: 30 / 64

28 DePuy Synthes User Manual Small Battery Drive II
Attachments
Saw Attachments
70 mm
Oscillating Saw Attachment II
(Crescentic Technique) (532.023)
The Oscillating Saw Attachment II is essentially designed
for use with semicircular saw blades (for example
03.000.313S) guided by a 1.6 mm Kirschner Wire. It can
also be used with saw blades with a shaft extension (for
example 03.000.340S) for reaching difficult-to-access
sites (such as intraoral).
Inserting the saw blade
Pull the saw blade coupling toward the handpiece and
insert the saw blade while rotating it slightly until it locks
into the saw attachment coupling. Release the saw blade
coupling and check that the saw blade is correctly fixed
by gently pulling on the saw blade.
Removing the saw blade
Pull the saw blade coupling towards the handpiece to
release the saw blade.
Warnings:
•
The appropriate surgical technique (036.000.907)
should be observed to ensure the safe and
successful application of the Crescentic Technique.
Precautions:
•
The saw attachments may only be used with the
handpiece in the ON mode.
•
Do not use the saw attachments in oscillating
drilling mode ( ).