Johnson & Johnson DePuy Synthes Small Battery Drive II, Руководство пользователя

Страница: 33 / 64

Small Battery Drive II User Manual DePuy Synthes 31
Disassembly
Disassemble device if applicable. Remove all instruments
and attachments from the power tool. Remove the
battery casing from the handpiece and then remove
the battery itself.
Cleaning and Disinfection of Batteries and Charger
1. To clean the batteries and the charger, wipe them
off with a clean, soft and lint-free cloth dampened
with deionized water and dry prior to processing
(Figs 1 and 2).
2. To disinfect the batteries and the charger, wipe them
off with a clean, soft and lint-free cloth dampened
with a minimum of 70% alcohol-based disinfectant
for thirty (30) seconds. A disinfectant that is VAH
listed, EPA registered or locally recognized is
recommended. This step has to be repeated two (2)
additional times using a new, clean, soft and lint-free
cloth dampened with a minimum 70% alcohol-based
disinfectant each time. Follow the instructions
provided by the manufacturer of the disinfectant.
Warnging: Inspect battery for cracks and damage.
Precautions:
•
Do not use solvents to disinfect the batteries.
Battery poles must not contact water or solvents:
danger of short circuiting.
•
Do not to spray the contacts or touch both contacts
at the same time with the damp cloth due to
danger of short circuiting.
Return batteries to charger (05.001.204) after each use
(Fig. 3). Upon completion of charging the battery, wipe
the battery with a minimum 70% alcohol-based
disinfectant prior to returning to use.
The aseptic transfer is detailed. Alternatively for the
Li-Ion battery 532.103 follow the guidelines provided
in the STERRAD/V-PRO sterilization guide.
No other sterilization methods are allowed.
Cleaning and Disinfection of handpieces, battery
casings, sterile covers and attach ments
Handpieces, battery casings, sterile covers and
attachments must be processed using
a) manual cleaning and / or
b) automated cleaning with manual pre-cleaning.
Note: Clean all movable parts in opened position.
Care and Maintenance
Cleaning and Disinfection
Figure 1
Figure 2
Figure 3
Preparation Prior to Reprocessing