Johnson & Johnson DePuy Synthes Small Battery Drive II, Руководство пользователя

Страница: 17 / 64

Small Battery Drive II User Manual DePuy Synthes 15
The Small Battery Drive II system offers a broad range
of attachments.
A wide range of rotating attachments has color-coded
rings, so that they can easily be identified. The table on
the next page lists the different types of attachments
available, the color coding as well as the speed of each
attachment.
Mounting the attachments
Insert the attachment into the attachment coupling
(Fig. 1). If the positioning pins do not lock into place
right away, twist the attachment a bit to the right or
left until it locks into the correct position. Check if the
attachment is seated correctly by gently pulling on it.
Removing the attachments
Press the attachment release buttons
6
(see figure on
page 7) simultaneously and remove the attachment from
the coupling.
Warnings:
•
To avoid injuries, the locking mechanism of the
tool has to be activated before every manipulation
and before placing the tool back down, i.e. the
mode switch has to be in OFF position.
•
Please observe the safety instructions and
warnings stated in the instructions when working
with attachments and tools. Only use original
Depuy Synthes attachments and tools. Damage
resulting from the use of attachments from other
manufacturers is not covered by the warranty.
•
Never use an attachment in reverse mode with an
old flexible shaft as this could cause serious injury
to the patient.
•
Only place the tool in an upright position
when changing attachments or cutting tools
intraoperatively. The handpiece must be laid
on its side when not in use in order to avoid
the risk of being dropped or contaminating
other instruments.
Attachments
General Information
Figure 1