Joab EcoDrive LA Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 89

background image

External Plough Systems

The following information is only applicable to hooklifts that have been installed with an
external plough system. For information regarding EcoDrive's plough system (APC), refer to

"Active Plough Control - APC", on page 27

External plough systems can be installed with EcoDrive hook-lifts. Examples of such plough
systems are the Mähler MC2 and MC3.

External plough's are setup to signal for a hydraulic supply from EcoDrive's control system.
The control system then signals for the main-valve-block to supply a metered hydraulic supply
to the external plough, at a preset pressure level.

External ploughs are normally ordered and assembled in conjunction with the hook-lift.
However, they can also be retro fitted. If a retro fit is required, the hook-lift's main-valve-block
will require software updates, and possibly additional JOAB hardware. For information regard-
ing a retro fit, please take contact with JOAB's after sales department to discuss the options
available.

Activating an External Plough

The hydraulic supply to an external plough must be activated before the plough can be oper-
ated. To do this, follow the instructions below:

1.

Make sure that one of the main page setups is selected.

2.

Use the CBW controller and press the left or right arrow button to enter the snow plough
page setup

.

NOTE:

If the snow plough page option is not visible when the arrow buttons are pressed, it

will need to be first activated. Refer to

"Page Setups", on page 14

for information about

how to do this.

3.

Make sure the PTO is switched off.

NOTE:

When the hydraulic supply to an external plough is activated, it is not possible to oper-

ate the hook-lift. Only plough and salt functions can be operated.

Refer to the external plough system's manual for information regarding start-up and operation
of the actual external plough.

Crane Operation

FFD (Friction Free Drive) must be deactivated before loading a crane body that has
dowel pins. Dowel pins are used to anchor a body onto the vehicle. Damage will
occur if FFD is active. Press the following icon

to deactivate FFD.

33

Operation | External Plough Systems

EcoDrive 2.0 manual: 1021970 Edition 1 | 2022-02-04

«
...
39
40
41
42
43
...
»

Содержание EcoDrive LA


























































































Отзывы:

Нет отзывов

Похожие инструкции для EcoDrive LA

Бренд: Accutrol Страницы: 25

Бренд: Zehnder Rittling Страницы: 36

Бренд: Balboa Страницы: 74

Welder / Generator GW4500

Бренд: Campbell Hausfeld Страницы: 20

BrewZilla 100L - Gen 4

Бренд: KegLand Страницы: 48

NuDAQ cPCI-7248

Бренд: ADLINK Technology Страницы: 59

TE-6201-W Series

Бренд: Pro's Kit Страницы: 2

Бренд: elsner elektronik Страницы: 148

Power2 S-MIG 100

Бренд: STAMOS Страницы: 33

Бренд: Ravaglioli Страницы: 72

Бренд: Abicor Binzel Страницы: 160

Pulstronic 2011 Mod. 313

Бренд: Suevia Страницы: 40

Бренд: Ravaglioli Страницы: 102

Бренд: Campbell Hausfeld Страницы: 48

Бренд: Telwin Страницы: 56

Бренд: GeoVision Страницы: 4

Бренд: Firepower Страницы: 80

Бренд: Keithley Страницы: 66

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды