Joab EcoDrive LA Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 89

background image

The hooklift can be equipped with asphalt driving mode. This allows the extending-section to
move up and down when in tipping mode, which is ideally suited for asphalt work. It allows a
asphalt container to extend into the asphalting machinery. Asphalt driving can be operated
from different control sources, for example, it can also be operated using a radio controller.

An additional sensor must be installed on the hook-lift for asphalt driving mode to work. The
sensor restricts the extending-section from fully retracting and opening the centre-lock.

An additional locking device must also be installed to prevent the body from moving sideways
when tipping, such as an internal mechanical lock. This allows the extending-section to move
up and down but not sideways. It is important to make sure that the body is compatible with the
additional locking method.

Operation

To operate asphalt driving mode follow the instructions below:

1.

Extend the extending-section at least 400 mm from the fully retracted position.

2.

Make sure that the hydraulic lock is open.

3.

Press and hold down the hydraulic lock open

icon while simultaneously tipping the

hook-lift up.

Keeping the hydraulic-lock open icon pressed while tipping overrides the system's default
behavior. Tipping when the hydraulic-lock is open is normally stopped to prevent damage.

4.

To operate the extending section, forwards or backwards, in tipping mode, hold down the
hydraulic-lock open icon while operating the extending section.

NOTE:

the extending section will stop approximately 300 mm before reaching its most

retracted position, when retracting. This is to ensure the centre-lock does not open.

Extendable Underrun Protection

The extendable-underrun-protection uses high pressure hydraulics. There is a
danger of serious injury or damage when operating it. Make sure there are no per-
sons or objects in the path of its sweep, before using it.

Vehicles that are fitted with an extendable-underrun-protection have a sensor that prevents the
operation of both shunting and tipping actions, if it is extended.

The underrun-protection must be retracted to operate tipping and shunting functions. This is a
safety measure to prevent damage.

To retract the underrun press the following icon

on the CBW controller. To extend the

underrun press the following icon

on the CBW controller.

32

Operation | Extendable Underrun Protection

EcoDrive 2.0 manual: 1021970 Edition 1 | 2022-02-04

«
...
38
39
40
41
42
...
»

Содержание EcoDrive LA


























































































Отзывы:

Нет отзывов

Похожие инструкции для EcoDrive LA

Бренд: ESAB Страницы: 21

SAF-FRO PRESTOTIG 240 AC/DC

Бренд: Air Liquide Страницы: 121

Бренд: liquidarc Страницы: 36

Бренд: STAYER WELDING Страницы: 56

Бренд: Balluff Страницы: 124

Бренд: BUCKINGHAM MFG Страницы: 7

Бренд: Danfoss Страницы: 44

Бренд: Invacare Страницы: 21

MASTER LOAD 750

Бренд: Lincoln Electric Страницы: 28

Бренд: ICP DAS USA Страницы: 4

Бренд: SKYSHL Страницы: 24

Бренд: LoadSurfer Страницы: 13

Бренд: Whirlwind Страницы: 2

Бренд: GYS Страницы: 76

Бренд: UE Systems Страницы: 13

Бренд: BMPRO Страницы: 32

Бренд: HADEF Страницы: 20

Бренд: Ultrasonic Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды