Joab EcoDrive LA Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 89

background image

Function Buttons

Each of the five page setups in the user interface can be configured with six personal func-
tions. The icons for the selected functions are placed at the bottom of the user interface (shown
in white rectangles, see

"User Interface", on page 12

). These functions are activated by press-

ing the corresponding function buttons below the screen: F1–F4 and the UP/DOWN arrow but-
tons.

To set the desired function associated with the function buttons, follow the procedure below:

1.

Press and hold the OK button while simultaneously pressing the function button that is to
be changed.

2.

The current icon set for that function will be displayed with a green rectangle around it, as
shown below.

3.

Use the UP/DOWN arrow buttons to select the desired function.

4.

Press the OK button.

NOTE: It is not possible to select all icons in each page-setup. For example, all icons related to
the operation of a snow plough are only available for selection when in the snow plough page-
setup.

Background Light

The background light for the user interface can be adjusted as required. This function allows
the user to quickly adjust the background light so that it is possible to read the display, when for
example there is a lot of sun shining on the display.

To adjust the background light simply press the OK button with a short press repeatedly to
switch between 100%, 20%, and 0% background light.

The display will automatically turn off whenever the hydraulic pump is off. It will only remain on
if there is a warning to display, as listed under

below.

Warnings

The user interface will display warnings whenever the hydraulic pump is not in operation.
These warnings display an icon or text indicating the following states:

Icon

Meaning

Icon

Meaning

The hook lift is not fully retracted.
It is not in its parked position.

The hydraulic-lock is open.

Table 4: User interface warnings - icons

16

Operation | CBW controller

EcoDrive 2.0 manual: 1021970 Edition 1 | 2022-02-04

«
...
22
23
24
25
26
...
»

Содержание EcoDrive LA


























































































Отзывы:

Нет отзывов

Похожие инструкции для EcoDrive LA

AirGENIO SUPERIOR

Бренд: 2VV Страницы: 27

Three-Phase Running Gear

Бренд: Miller Electric Страницы: 4

Бренд: WALTCO Страницы: 20

Бренд: OMA Страницы: 53

Бренд: Omega Lift Страницы: 24

Бренд: Omega Lift Страницы: 8

Бренд: OMA Страницы: 45

BrewZilla 100L - Gen 4

Бренд: KegLand Страницы: 48

Бренд: Keg King Страницы: 4

SystemRoMedic EvaDrive450

Бренд: Handicare Страницы: 37

RAZOR CUT 40 AIR

Бренд: Unimig Страницы: 28

Бренд: Thermo Scientific Страницы: 68

RCT-224 Trailer

Бренд: Miller Electric Страницы: 24

Бренд: M-system Страницы: 4

CompuScope 85GC

Бренд: Gage Страницы: 174

Бренд: VAT Страницы: 53

Бренд: welldana Страницы: 7

Бренд: Inta Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды