Joab EcoDrive LA, Руководство по эксплуатации и обслуживанию

Страница: 33 / 89

Position Memory System - PMS
This function allows for the recording of shunting and tipping positions. Whenever PMS is act-
ive, the hooklift will automatically stop at the saved position for shunting or tipping.
Set the Shunting Position
1. Operate the hook-lift in shunting mode so that it is at the desired position and stop.
2. Press and hold down the icon "PMS 1" for five seconds, until it illuminates. Once illu-
minated, it is active. The hook-lift will now stop at the set position when performing further
shunting operations.
Set the Tipping Position
1. Operate the hook-lift in tipping mode so that it is at the desired position and stop.
2. Press and hold down the icon "PMS 1" for five seconds, until it illuminates. Once illu-
minated, it is active. The hook-lift will stop at the set position when performing further tip-
ping operations.
To deactivate PMS, simply press the PMS icon for a short time only, so that it is no longer illu-
minated. A short press of the PMS button will activate/deactivate the PMS, while a long press
sets a new position for the PMS.
Fast Lowering System - FLS
Fast lowering with intelligent speed compensation allows the driver to lower a body, when tip-
ping, at maximum speed, either with a full or empty load.
To activate this function, simply press and hold down the bottom button (the button with a small
raised dot on it) on the control-stick when lowering the body. See also
"Control Stick Function",
on page 17 .
Fast Lowering System Plus - FLS+
This provides a 50% decrease in the time taken to lower the hooklift. This is an addition to the
standard FLS. See also
"Fast Lowering System - FLS", on page 25 .
To activate this function, simply press and hold down the bottom button (the button with a small
raised dot on it) on the control-stick when lowering the body. See also
"Control Stick Function",
on page 17 .
Fast Tipper System - FTS
Intelligent, stepless, fast tipping. The system automatically senses the load on the hooklift and
identifies the optimal speed for the tipping operation of the load.
To activate this function, simply press and hold down the bottom button (the button with a small
raised dot on it) on the control-stick when tipping the body. See also
"Control Stick Function",
on page 17 .
25
Operation | EcoDriveOptional Functions
EcoDrive 2.0 manual: 1021970 Edition 1 | 2022-02-04