Joab EcoDrive LA Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 89

background image

The mounting bracket is used to mount the unit inside the cab. Normally it is mounted onto the
driver's A-post. However, it is also possible to mount it onto the driver's right arm rest (an extra
cable is required to do this). This is ideal for vehicles equipped with a snow plough. Refer to

"Appendix 2 - APC Transfer Kit ", on page 79

for further information about this.

A split setup is also possible with the control-stick mounted next to the driver's seat and the dis-
play on the A-post. This however is not ideal for snow ploughs.

User Interface

Shown opposite is an overview of the user
interface.

The areas marked with a white rectangle on
the screen are programmable. The user can
set which functions are placed there. These
functions are activated by pressing the cor-
responding buttons: F1–F4 and the
UP/DOWN arrows. For further information on
how to set these functions, refer to

Buttons", on page 16

below.

The function icons (F1–F4 and the UP/DOWN
arrow buttons) that are displayed in the user
interface is dependent upon which page setup
is selected. There are five different page
setups. To switch between these press either
the left or right arrow button located below the screen. For more information see

Setups", on page 14

All other icons that are displayed on the screen (not the user defined functions) simply provide
feedback to the user regarding the status of the hooklift, which page setup is active, and active
functions, such as lights on etc.

See

"Icon Definitions"

, below for a list of the icons and their function.

Icon Definitions

Provided below is a list of the functions available in the user interface and their meaning. Note,
not all functions listed below are activated for all installations. Some of the functions are
optional extras, these are marked with an asterisk (*).

Functions that can be selected for the programmable areas (F1–F4 and the UP and DOWN
buttons) are coloured white. All other buttons (orange and green) simply provide feedback to
the user as to whether or not they are active.

12

Operation | CBW controller

EcoDrive 2.0 manual: 1021970 Edition 1 | 2022-02-04

«
...
18
19
20
21
22
...
»

Содержание EcoDrive LA


























































































Отзывы:

Нет отзывов

Похожие инструкции для EcoDrive LA

BIO 55 MIX W-PWM 1F TRS6K

Бренд: Regulus Страницы: 72

DESKLINE DL15 IC

Бренд: Linak Страницы: 33

CONPROSYS CPS-MC341-DS1-111

Бренд: Contec Страницы: 71

Бренд: WALTCO Страницы: 39

Demo Zone K1854-2

Бренд: Lincoln Electric Страницы: 22

Бренд: JLG Страницы: 97

Бренд: ESAB Страницы: 45

Бренд: SPINOGY Страницы: 27

Бренд: Jasic Страницы: 18

ERCOLE QK-E2500

Бренд: Quilo Страницы: 10

ARCMASTER 300 AC/DC

Бренд: Thermal Arc Страницы: 116

GAROG TST WS Series

Бренд: Chamberlain Страницы: 17

Бренд: Interlift Страницы: 6

Бренд: King Ultrasonic CO Страницы: 25

Бренд: Kampmann Страницы: 16

Бренд: Palfinger Страницы: 2

Бренд: Palfinger Страницы: 35

Бренд: Talgil Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды