JLG GRADALL 544D-10 Скачать руководство пользователя

Страница: 105 / 142

Section 5 - Attachments

5-43

31200172

Preparation and Setup:

1. Ensure the telehandler is on a firm surface and is level.

2. Engage the park brake. Blocking the wheels is also recommended.

3. Level the platform, both side to side (frame level) and front to back (attachment

tilt).

4. Keep area under platform free from personnel.

5. When personnel are on platform, the operator must remain seated in cab with

personnel in direct line of sight.

DO NOT

lift or carry persons in a bucket or on forks.

WARNING

FALL HAZARD.

Never tilt the platform forward, rearward, or level the machine

when the platform is occupied.

Содержание GRADALL 544D-10















































































































































Результаты поиска

Содержание GRADALL 544D-10

Отзывы:

Похожие инструкции для GRADALL 544D-10

Бренды по названию

Популярные бренды

JLG GRADALL 544D-10, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание GRADALL 544D-10

Отзывы:

Похожие инструкции для GRADALL 544D-10

Бренды по названию

Популярные бренды