Jeep WRANGLER 2020, Руководство пользователя

Страница: 163 / 548

STARTING AND OPERATING 161
A
CTIVATION
To activate the feature, push the Active Speed
Limiter button, and a message will appear along
with an indicator light in the instrument cluster
display to signal that Active Speed Limiter has
been activated.
Push the SET (+) or SET (–) buttons on the right
of the steering wheel to raise and lower the
Active Speed Limiter to the desired value.
Pushing and holding down the SET (+) or SET (–)
button will increase/decrease the speed value
by increments of 5 mph (5 km/h).
Each time the Active Speed Limiter is activated,
it will be set to the last programmed value from
the previous activation.
NOTE:
The Cruise Control (if equipped) and Adaptive
Cruise Control (if equipped) features will be
unavailable while the Active Speed Limiter is in
use.
E
XCEEDING
T
HE
S
ET
S
PEED
By fully pressing the accelerator pedal, the
programmed maximum speed can be exceeded
while the device is active.
In the event that the Active Speed Limiter set
value is exceeded manually with a driver
acceleration, an audible indicator will sound,
the indicator light will rapidly flash, and a
message will appear in the instrument cluster
display.
The feature will remain disabled until the
vehicle speed drops below the set Active Speed
Limiter value, where it will reactivate
automatically.
D
EACTIVATION
To turn off Active Speed Limiter, push the Active
Speed Limiter button on the right side of the
steering wheel. A message will appear in the
instrument cluster display to confirm that the
feature has been turned off.
CRUISE CONTROL SYSTEMS — IF EQUIPPED
Your vehicle may be equipped with the Cruise
Control system, or the Adaptive Cruise Control
(ACC) system:

Cruise Control will keep your vehicle at a
constant preset speed.

Adaptive Cruise Control (ACC) will adjust the
vehicle speed up to the preset speed to main-
tain a distance with the vehicle ahead.
NOTE:

In vehicles equipped with ACC, if ACC is not
enabled, Fixed Speed Cruise Control will not
detect vehicles directly ahead of you. Always
be aware of the feature selected.

Only one Cruise Control feature can operate
at a time. For example, if Fixed Speed Cruise
Control is enabled, Adaptive Cruise Control
will be unavailable, and vice versa.
4
21_JL_OM_EN_EU_t.book Page 161