Jeep WRANGLER 2020, Руководство пользователя

Страница: 475 / 548

GETTING TO KNOW YOUR VEHICLE 13
2. Check to see if the charging cable is ready
to charge by reviewing the indicator lights.
3. If the charging cable is ready to charge,
ensure the vehicle is in PARK, and then
connect the charge connector to the
vehicle’s charge inlet. You will hear a “click”
when the charge connector is inserted
correctly and coupled with the vehicle’s
charge inlet.
Inserting The Charge Connector Into The Vehicle
Charge Inlet
4. When the vehicle commences charging, the
green indicator light will turn on.
NOTE:
The vehicle should start charging automatically.
If not, please check the following:

Mode 2 Charging Cable — The charging cable
status indicators illuminate green, red, or
yellow to identify the charging status. Refer to
“Troubleshooting Using The Status Indicator
Display” in this section for further informa-
tion on the charging status.

Wall Receptacle — Check whether the wall
receptacle is functional (no power outage)
and/or plug the charging cable into a
different wall receptacle.

Charging Schedule — Check whether or not
the charging schedules have been enabled. If
enabled, check that you are within the sched-
uled time and day of the week. If a charging
schedule has been enabled in the vehicle,
and it is outside the time and day of the
week, you may override the schedule for this
charging event by plugging in the charge
connector, unplugging it, and then plugging it
back into the vehicle charge inlet. Complete
the double plug sequence within 10 seconds
or use the button on the touchscreen to over-
ride the set schedule.

Hood Ajar — Check whether the hood is open.
Charging is disabled while the hood is open,
and will resume when the hood closes.
5. To stop the charging process, push the
unlock button on the key fob to unlock the
charge inlet, then disconnect the vehicle
charge connector first and then the
charging cable from the wall receptacle. To
disengage the vehicle coupler, push the
button on the charge connector first and
then remove the connector from the vehicle
charge inlet.
WARNING!
INSTRUCTIONS PERTAINING TO A RISK OF FIRE
OR ELECTRIC SHOCK: Improper connection of
the equipment-grounding conductor could
result in a risk of electric shock. Check with a
qualified electrician or serviceman if you are in
doubt as to whether the wall receptacle is
properly grounded. Do not modify the plug
provided with the product – if it does not fit the
outlet, you must have a proper outlet installed
by a qualified electrician.
2
21_JL_H_SU_EN_EU_t.book Page 13