Jeep WRANGLER 2020, Руководство пользователя

Страница: 63 / 548

GETTING TO KNOW YOUR VEHICLE 61
Stop/Start System — If Equipped
While in an Autostop, the Climate Control
system may automatically adjust airflow to
maintain cabin comfort. Customer settings will
be maintained upon return to an engine running
condition.
Windshield Wiper De-Icer — If Equipped
The windshield wiper de-icer is a heating
element located at the base of the windshield.
It operates automatically once the following
conditions are met:

Activation By Front Defrost
The wiper de-icer activates automatically
during a cold weather manual start with full
defrost, and when the ambient temperature
is below 33°F (0.6°C).

Activation By Rear Defrost
The wiper de-icer activates automatically
when the Rear Defrost is operating and the
ambient temperature is below 33°F (0.6°C).

Activation By Remote Start Operation
When the Remote Start is activated and the
outside ambient temperature is less than
33°F (0.6°C) the windshield wiper de-icer is
activated. Exiting Remote Start will resume
previous operation. If the Windshield Wiper
De-Icer was active, the timer and operation
will continue.
Operating Tips Chart
NOTE:
The below chart is for Manual Override Opera-
tion.
WEATHER
CONTROL
SETTINGS
Hot Weather And
Vehicle Interior Is Very
Hot
Set the mode control
to (Panel Mode),
(A/C) on, and
blower on high. Roll
down the windows for
a minute to flush out
the hot air. Adjust the
controls as needed to
achieve comfort.
Warm Weather
Turn (A/C) on and
set the mode control
to (Panel Mode).
Cool Sunny
Operate in
(Bi-Level Mode).
Cool & Humid
Conditions
Set the mode control
to (Floor Mode)
and turn (A/C) on
to keep windows
clear.
Cold Weather
Set the mode control
to (Floor Mode). If
windshield fogging
starts to occur, move
the control to (Mix
Mode).
WEATHER
CONTROL
SETTINGS
2
21_JL_OM_EN_EU_t.book Page 61