Jeep WRANGLER 2020, Руководство пользователя

Страница: 89 / 548

GETTING TO KNOW YOUR VEHICLE 87
(Continued)
6. While pulling the release lever on the top of
the rail rearward, place the side link into the
guide track on the top of the rail then
release the lever.
Step Six
7. Unsnap and remove the black boot cover.
This cover should be discarded. It was
intended as a protective cover for shipping
only.
8. Raise the soft top
Ú
page 80.
NOTE:
Be sure the wire harness in the left rear corner
is not tangled in the soft top bows before you lift
the top.
H
ARD
T
OP
F
RONT
P
ANEL
(
S
) R
EMOVAL
CAUTION!

The hard top is not designed to carry any
additional loads, such as after-market roof
racks, spare tires, building materials,
hunting or camping supplies, etc. For
optional Mopar® accessory roof racks
Ú
page 106.

Do not move your vehicle until the top has
been either fully attached to the front
header, sport bar, and body side or fully
removed.
Failure to follow these cautions may cause
interior water damage, stains or mildew:

It is recommended that the top be free of
water prior to panel removal. Removing the
top, opening a door or lowering a window
while the top is wet may allow water to drip
into the vehicle’s interior.

The hard top assembly must be positioned
properly to ensure sealing. Improper instal-
lation can cause water to leak into the
vehicle’s interior.

Careless handling and storage of the
removable roof panels may damage the
seals, causing water to leak into the
vehicle’s interior.

The front panel(s) must be positioned prop-
erly to ensure sealing. Improper installation
can cause water to leak into the vehicle’s
interior.
CAUTION!
2
21_JL_OM_EN_EU_t.book Page 87