Jeep Gladiator 2021 страница 42 Скачать руководство пользователя

Страница: 42 / 484

GETTING TO KNOW YOUR VEHICLE

(Continued)



Push the heated seat button a third time

to turn the LO setting on.



Push the heated seat button a fourth time

to turn the heating elements off.

NOTE:



The engine must be running for the heated

seats to operate.



The level of heat selected will stay on until

the operator changes it.

For information on use with the Remote Start

system, see

page

23.

EAR

EAT

RMREST

— I

QUIPPED

The center part of the rear seat can also be

used as a rear armrest with cupholders. To

unfold it, grab the pull strap under the head

restraint and pull it forward.

Rear Seat Armrest

NOTE:

The cupholder liner can be removed for

cleaning.

EAD

ESTRAINTS

Head restraints are designed to reduce the risk

of injury by restricting head movement in the

event of a rear impact. Head restraints should

be adjusted so that the top of the head restraint

is located above the top of your ear.

WARNING!



Persons who are unable to feel pain to the

skin because of advanced age, chronic

illness, diabetes, spinal cord injury, medica

tion, alcohol use, exhaustion or other phys

ical condition must exercise care when

using the seat heater. It may cause burns

even at low temperatures, especially if

used for long periods of time.



Do not place anything on the seat or seat

back that insulates against heat, such as a

blanket or cushion. This may cause the seat

heater to overheat. Sitting in a seat that has

been overheated could cause serious

burns due to the increased surface

temperature of the seat.

WARNING!

(Continued)

WARNING!

Be certain that the seatback is securely

locked into position. If the seatback is not

securely locked into position the seat will not

provide the proper stability for child seats

and/or passengers. An improperly latched

seat could cause serious injury.

WARNING!



All occupants, including the driver, should

not operate a vehicle or sit in a vehicle’s seat

until the head restraints are placed in their

proper positions in order to minimize the risk

of neck injury in the event of a crash.

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды

Jeep Gladiator 2021, Руководство пользователя

Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды