Jeep Gladiator 2021 Скачать руководство пользователя страница 143

Страница: 143 / 484

STARTING AND OPERATING

141

back up system and should not be relied upon

as the primary method by which the driver shifts

the vehicle into PARK.
The conditions under which AutoPark will

engage are outlined on the following pages.

If the vehicle is not in PARK and the driver turns

off the engine, the vehicle may AutoPark.
AutoPark will engage when all of these

conditions are met:



Vehicle is equipped with an eight-speed

transmission



Driver door is ajar or if the driver door is

removed and the driver is not on the seat

(seat pad sensor detects driver missing)



Vehicle is not in PARK



Vehicle speed is 0

mph (0

km/h)



Ignition switched from RUN to OFF

NOTE:

For Keyless Enter-N-Go equipped vehicles, the

engine will turn off and the ignition will change

to ACC mode. After 30

minutes the ignition

switches to OFF automatically, unless the driver

turns the ignition OFF.

If the vehicle is not in PARK and the driver exits

the vehicle with the engine running, the vehicle

may AutoPark.

AutoPark will engage when all of these

conditions are met:



Vehicle is equipped with an eight-speed

transmission



Driver door is ajar or if the driver door is

removed and the driver is not on the seat

(seat pad sensor detects driver missing)



Vehicle is not in PARK



Driver door is removed



Vehicle speed is 1.2

mph (2.0

km/h) or less



Driver seat belt is unbuckled



Driver door is ajar



Brake pedal is not pressed

The message “AutoPark Engaged Shift to P then

Shift to Gear” will display in the instrument

cluster.

NOTE:

In some cases the ParkSense graphic will be

displayed in the instrument cluster. In these

cases, the gear selector must be returned to “P”

to select desired gear.

WARNING!



Driver inattention could lead to failure to

place the vehicle in PARK. ALWAYS DO A

VISUAL CHECK that your vehicle is in PARK

by verifying that a solid (not blinking) “P” is

indicated in the instrument cluster display

and on the gear selector. If the "P" indicator

is blinking, your vehicle is not in PARK. As

an added precaution, always apply the

parking brake when exiting the vehicle.



AutoPark is a supplemental feature. It is not

designed to replace the need to shift your

vehicle into PARK. It is a back up system

and should not be relied upon as the

primary method by which the driver shifts

the vehicle into PARK.

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Jeep Gladiator 2021, Руководство пользователя, Страница: 143 / 484

Результаты поиска

Содержание Gladiator 2021

Отзывы: