Jeep Gladiator 2021 страница 35 Скачать руководство пользователя

Страница: 35 / 484

GETTING TO KNOW YOUR VEHICLE

EAR

OOR

EMOVAL

Door Removal Warning Label

Use this QR code to access your

digital experience.
To remove the rear doors,

proceed as follows:

1. Roll down the glass window

to prevent any damage.

2. Remove the hinge pin nuts from the upper

and lower outside hinges (using a #T50

Torx

head driver).

NOTE:

The hinge pin nuts can be stowed in the

Fastener Bin under the rear seat.

Hinge Pin Nut

WARNING!

Do not drive your vehicle on public roads with

the doors removed as you will lose the

protection they can provide. This procedure is

furnished for use during off-road operation

only.

WARNING!



All occupants must wear seat belts during

off-road operation with doors removed. For

information on off-road driving tips, see

page

215.



Do not store detached doors inside of the

vehicle, as they may cause personal injury

in the event of an accident.



Assistance to remove doors may by

required due to the weight of the door to

avoid personal injury.

CAUTION!



Hinge pins can break if overtightened during

door reinstall (Max Torque: 5.88

ft·lb /

N·m). For information on off-road driving

tips, see

page

215.



Do not over-tighten Torx fasteners. Damage

to the vehicle’s parts will occur.

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды

Jeep Gladiator 2021, Руководство пользователя

Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды