Jeep Gladiator 2021 страница 248 Скачать руководство пользователя

Страница: 248 / 484

246

MULTIMEDIA

Replay

The replay function provides a means to store

and replay up to 22

minutes of music audio and

minutes of talk radio. Once the channel is

switched, content in replay memory is lost.

Press the Replay button on the touchscreen.

The play/pause, rewind/forward and live

buttons will display at the top of the screen,

along with the replay time.

You can exit by pressing the Replay button on

the touchscreen any time during the Replay

Mode.

Play/Pause

Press the Pause/Play button on the touchscreen to pause the

playing of live or rewound content at any time. Play can be

resumed by pressing the Pause/Play button again on the

touchscreen.

Rewind

Press the Rewind button on the touchscreen to rewind the

content in steps of five seconds. Pressing the Rewind button

on the touchscreen for more than two seconds rewinds the

content. The radio begins playing the content at the point at

which the press is released.

Forward

Each press of the Forward button on the touchscreen forwards

the content in steps of five seconds. Forwarding of the content

can only be done when the content is previously rewound, and

therefore, cannot be done for live content. A continuous press

of the Forward button on the touchscreen also forwards the

content. The radio begins playing the content at the point at

which the press is release.

Live

Press the Live button on the touchscreen to resume the playing

of live content.

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды

Jeep Gladiator 2021, Руководство пользователя

Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды