Jeep Gladiator 2021 страница 169 Скачать руководство пользователя

Страница: 169 / 484

STARTING AND OPERATING

167

Axle Lock Switch Panel

This feature will only activate when the following

conditions are met:



Ignition in RUN position, vehicle in 4H

(Four-Wheel Drive High Range).



The vehicle must be in Off Road+ active

page

168.



Vehicle must be in ESC “Full Off” mode

page

304.



Vehicle must not be actively in a high wheel

slip or tight cornering condition.

To activate the system, push the AXLE LOCK

switch down to lock the rear axle only (“REAR

ONLY” will illuminate).

To unlock the rear axle, push the AXLE LOCK

OFF button.
Axle lock will disengage if the vehicle is taken

out of 4H (Four-Wheel Drive High Range), Off

Road+ is turned off by the driver, ESC “Full Off”

is exited, or the ignition switch is turned to the

OFF position.

NOTE:

The indicator lights will flash until the rear axle

is fully locked or unlocked.

The rear axle lock system may temporarily

disengage the rear locker under some

conditions.
If this occurs, the rear axle will automatically

re-lock as soon as the system allows.
If an axle lock request cannot be completed by

the system within 5 seconds due to vehicle

operating conditions not being correct, the

request will be canceled and the driver may

need to re-request the locker to be activated.

LECTRONIC

WAY

ISCONNECT

—

QUIPPED

Your vehicle may be equipped with an

electronic disconnecting stabilizer/sway bar.

This system allows greater front suspension

travel in off-road situations.
This system is controlled by the SWAY BAR

switch located on the instrument panel (to the

right of the steering column).

SWAY BAR Switch

Push the SWAY BAR switch to disconnect or

connect the sway bar. The “Sway Bar Indicator

Light” (located in the instrument cluster) will

illuminate when the bar is disconnected. The

“Sway Bar Indicator Light” will flash during

activation transition, or when activation

conditions are not met. The stabilizer/sway bar

should remain in on-road mode during normal

driving conditions.

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды

Jeep Gladiator 2021, Руководство пользователя

Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды