Jeep Gladiator 2021 Скачать руководство пользователя страница 99

Страница: 99 / 484

GETTING TO KNOW YOUR VEHICLE

The Torx head fasteners that attach the hard

top to the body should be torqued to 155

in-lb

+/- 22

in-lb (17.5

N·m +/- 2.5

N·m) using the

provided #T50

Torx head driver and ratchet.

DOOR FRAME — IF EQUIPPED WITH A SOFT

TOP

OOR

RAME

EMOVAL

NOTE:

The rear door frames must be removed first,

followed by the front door frames.

1. Using the provided #T40

Torx head driver

and ratchet, loosen the Torx head

fasteners located on the underside of each

door hinge (two per door), and remove the

fasteners by pulling downward.

Step One

NOTE:

The fasteners will not fall out once completely

loose, as they are held in place by design.

CAUTION!

Do not overtighten Torx fasteners. Damage to

the retainers will occur.

WARNING!



Do not drive your vehicle on public roads

with the door frame(s) removed as you will

lose the protection that they can provide.

This procedure is furnished for use during

off-road operation only.



Do not drive your vehicle on public roads

with the doors removed as you will lose the

protection that they can provide. This

procedure is furnished for use during

off-road operation only.

CAUTION!

Failure to follow these cautions may cause

interior water damage, stains or mildew:



Opening a door or lowering a window while

the top is wet may allow water to drip into

the vehicle's interior.



Careless handling and storage of the

removable door frame(s) may damage the

seals, causing water to leak into the

vehicle's interior.



The door frame(s) must be positioned prop

erly to ensure sealing. Improper installation

can cause water to leak into the vehicle's

interior.

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Jeep Gladiator 2021, Руководство пользователя, Страница: 99 / 484

Результаты поиска

Содержание Gladiator 2021

Отзывы: