Jeep Gladiator 2021 страница 36 Скачать руководство пользователя

Страница: 36 / 484

GETTING TO KNOW YOUR VEHICLE

3. Slide the front seat(s) fully forward.

4. Pry open and remove the plastic wiring

access door from the bottom of the B-pillar.

Wiring Access Door

5. Unplug the wiring connector.

NOTE:

Squeeze the tab on the base of the wiring

harness. This will unlock the connector tab,

allowing the wiring connector to be unplugged.

Unhook the wire harness strap from the hook on

the bodyside door opening. Store the wire

connector in the lower basket of the door.

Wiring Connector

6. With the door in the open position, remove

the check bolt from the door check

attachment on the bodyside (using a #T40

Torx head driver).

NOTE:

Keep the check arm in the extended position for

easier reinstallation.

Door Check

7. With the door open, lift the door with the

help of another person, to clear the hinge

pins from their hinges and remove the door.

To reinstall the door(s), perform the previous

steps in the reverse order.

NOTE:

The upper hinge has a longer pin, which can be

used to assist in guiding the door into place

when reinstalling. When reinstalling the check

arm attachment bolt, bolt torque should be

between 11.76

ft·lb / 16

N·m and 27.9

ft·lb /

N·m.

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды

Jeep Gladiator 2021, Руководство пользователя

Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды