Jeep Gladiator 2021, Руководство пользователя

Страница: 72 / 484

70 GETTING TO KNOW YOUR VEHICLE
Unauthorized alterations may compromise
safety, regulatory compliance, and system
performance, and will void the warranty. Do not
place any flame sources, such as lighted
candles, on or near the Jeep® wireless speaker.
The Jeep® wireless speaker contains small
parts that may be a choking hazard and is not
suitable for children under age 3. Do not
continue charging the battery if it does not
reach full charge within the specified charging
time. Overcharging may cause the battery to
become hot, rupture, or ignite. If you see any
heat deformation or leakage, properly dispose
of the battery. Do not attempt to charge the
battery in temperatures outside the range of
32°- 104°F (0° - 40°C). If the battery begins to
leak, do not allow the liquid to come in contact
with your skin or eyes. If contact has been
made, wash the affected area with plenty of
water and seek medical attention immediately.
Do not expose the Jeep® wireless speaker or
battery to excessive heat, including direct
sunlight or fire. Do not store or use inside cars
in hot weather, where it can be exposed to
temperatures in excess of 115°F (60°C). Doing
so may cause the battery and power supply to
generate heat, rupture, or ignite. Using the
Jeep® wireless speaker in this manner also
may result in a loss of performance and a
shortened life expectancy. Extended exposure
to direct sunlight may damage the external
appearance and material qualities. Do not step
on, throw, or drop batteries or the power supply
or device, or expose them to a strong shock. Do
not pierce, crush, dent, or deform the batteries
or power supply in any way. If either becomes
deformed, properly dispose of it. Do not
short-circuit batteries. Do not attempt to service
the Jeep® wireless speaker yourself. Opening
or removing covers may expose you to
dangerous voltages or other hazards and will
void the manufacturer’s warranty. To prevent
risk of fire or electric shock, avoid overloading
wall outlets, extension cords, or integral
convenience receptacles. Your Bluetooth®
device (mobile phone, music player, tablet,
laptop, etc.) must support the A2DP Bluetooth®
profile in order to work wirelessly with your
Jeep® wireless speaker. The A2DP profile is
supported by most recent mobile products with
built-in Bluetooth® capability. Please refer to
your device’s user manual for details and
instruction regarding the Bluetooth® profiles it
supports. This device complies with part 15 of
the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not
cause harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
Jeep® follows Safety Instruction for CE- LV. Do
not operate products in temperatures outside the
range of -5 to 40°C. Operating Frequency Band:
2402 MHz to 2480 MHz Maximum RF power:
6 dBm EIRP. Do not install this equipment in a
confined space or building, such as a bookcase
or similar unit that is not well-ventilated. The
ventilation should not be impeded by covering
the ventilation openings with items such as
newspaper, tablecloths, curtains etc.
WARNING!
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
Do not place objects filled with liquids, such
as vases, on the apparatus.
WARNING!
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type. If the battery or battery pack
is exposed to excessive heat or fire, personal
injury may occur.