Jeep Gladiator 2021 Скачать руководство пользователя страница 34

Страница: 34 / 484

GETTING TO KNOW YOUR VEHICLE

4. Pull up on the red locking tab to unlock the

wiring harness.

Closed Wiring Harness

5. Push and hold down the black security tab

under the wiring harness, and lift the

harness lever into the open position.

Open Wiring Harness

6. With the wiring harness open, pull

downward on the wiring connector to

unplug. Unhook the wire harness strap from

the hook on the bodyside door opening.

Store the wiring connector in the lower door

basket of the door.

7. With the door in the open position, remove

the check bolt from the door check

attachment on the bodyside (using a

#T40

Torx head driver).

NOTE:

Keep the check arm in the extended position for

easier re-installation.

Door Check

8. With the door open, lift the door with the

help of another person, to clear the hinge

pins from their hinges and remove the door.

To reinstall the door(s), perform the previous

steps in the reverse order.

NOTE:

The upper hinge has a longer pin, which can be

used to assist in guiding the door into place

when reinstalling. When reinstalling the door

check arm attachment bolt, bolt torque should

be between 11.76

ft·lb / 16

N·m and 27.9

ft·lb /

N·m.

1 — Locking Tab
2 — Wiring Harness Lever

1 — Wiring Harness Lever
2 — Black Security Tab

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Jeep Gladiator 2021, Руководство пользователя, Страница: 34 / 484

Результаты поиска

Содержание Gladiator 2021

Отзывы: