Jeep Gladiator 2021 Скачать руководство пользователя страница 371

Страница: 371 / 484

IN CASE OF EMERGENCY

369

3. Assemble the jack and jacking tools.

Connect the jack handle driver to the

extension, then to the lug wrench.

Assembled Jack And Tools

4. Operate the jack from the front or the rear of

the vehicle. Place the jack under the axle

tube, as shown. Placement for the front and

rear jacking locations are critical. See below

images for proper jacking locations. Do not

raise the vehicle until you are sure the jack

is fully engaged.

Front Jack Lifting Point

Front Jacking Location

Rear Jack Lifting Point

Rear Jacking Location

CAUTION!

Before raising the wheel off the ground, make

sure that the jack will not damage surround

ing truck parts and adjust the jack position as

required.

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Jeep Gladiator 2021, Руководство пользователя, Страница: 371 / 484

Результаты поиска

Содержание Gladiator 2021

Отзывы: