Jeep Gladiator 2021, Руководство пользователя

Страница: 33 / 484

GETTING TO KNOW YOUR VEHICLE 31
Use this QR code to access your
digital experience.
Outside rearview mirrors are
mounted on the doors. If you
choose to remove the doors,
see an authorized dealer for a
replacement cowl-mounted outside mirror.
Federal law requires outside mirrors on vehicles
for on-road use.
NOTE:
When front doors are removed, the message
“Blind Spot Alert Temporarily Unavailable” will
display in the instrument cluster display. Power
Mirrors and Power Door Locks will also be
unavailable.
To remove the front doors, proceed as follows:
1. Roll down the glass window to prevent any
damage.
2. Remove the hinge pin nut from the upper
and lower outside hinges (using a #T50 Torx
head driver).
NOTE:
The hinge pin nuts can be stowed in the
Fastener Bin located under the rear seat.
Hinge Pin Nut
3. Remove the plastic wiring access door
under the instrument panel by sliding the
plastic panel along the door frame toward
the seats until the tabs are detached.
Wiring Access Door
NOTE:
Do not force open; this will break the plastic
cover.
CAUTION!

Hinge pins can break if overtightened during
door reinstall (Max Torque: 5.88 ft·lb /
8 N·m). For information on off-road driving
tips, see
Ú
page 215.

Do not over-tighten Torx fasteners. Damage
to the vehicle’s parts will occur.
2