Jeep Gladiator 2021 страница 352 Скачать руководство пользователя

Страница: 352 / 484

350

SAFETY

Can the LATCH anchorages and the seat belt be

used together to attach a rear-facing or

forward-facing child restraint?

Do not use the seat belt when you use the LATCH

anchorage system to attach a rear-facing or

forward-facing child restraint.
Booster seats may be attached to the LATCH

anchorages if allowed by the booster seat

manufacturer. See your booster seat owner’s

manual for more information.

Can a child seat be installed in the center position

using the inner LATCH lower anchorages from the

outboard seating positions?

Yes

You can install child restraints with flexible lower

anchors in the center position. The inner anchorages

are 19.2

inches (488

mm) apart. Do not install child

restraints with rigid lower anchors in the center

position.

Can two child restraints be attached using a

common lower LATCH anchorage?

Never “share” a LATCH anchorage with two or more

child restraints. If the center position does not have

dedicated LATCH lower anchorages, use the seat belt

to install a child seat in the center position next to a

child seat using the LATCH anchorages in an

outboard position.

Can the rear-facing child restraint touch the back of

the front passenger seat?

Yes

The child seat may touch the back of the front

passenger seat if the child restraint manufacturer

also allows contact. See your child restraint owner’s

manual for more information.

Can the rear head restraints be removed?

Yes

The center head restraint can be removed if it

interferes with the installation of the child restraint.

Frequently Asked Questions About Installing Child Restraints With LATCH

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды

Jeep Gladiator 2021, Руководство пользователя

Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды