janitza UMG 96 RM-PN, Руководство пользователя

Страница: 62 / 128

62
UMG 96RM-PN
Rotation time (addr. 039)
Setting range: 0 to 60 seconds
If 0 seconds is set, then there is no rotation between
the measured value screens selected for measured
value rotation.
The rotation time applies to all screen rotation profiles.
Screen rotation profile (addr. 038)
Setting range: 0 to 3
0 - Screen rotation profile 1, preassigned.
1 - Screen rotation profile 2, preassigned.
2 - Screen rotation profile 3, preassigned.
3 - Screen rotation profile, customer-specific.
Measured value screens
After the power is restored, the UMG 96RM-PN displays
the first measured value table from the current screen
profile. So that the selection of measured values to be
displayed remains clear, at the factory only one part of
the available measured values is pre-programmed to be
called up in the measured value screen. If you desire to
display other measured values on the screen of the UMG
96RM-PN, select a different screen profile.
Measured value rotation
All measured values are calculated every 10/12 periods,
and are available once a second in the measured value
screens. Two methods are available for bringing up
the measured value screens:
• The automatically rotating display of selected
measured value screens, referred to here as
"measured value rotation".
• Choosing a measured value screen from a selected
screen profile, using buttons 1 and 2.
Both methods are available simultaneously. Measured
value rotation is active when at least one measured value
screen is programmed with a rotation time greater than
0 seconds.
Pressing a button allows you to scroll through
the measured value screens for the selected screen
profile. If no button is pressed for around 60 seconds,
the device switches to measured value rotation, and
the measured values from the selected screen rotation
profile programmed measured value screens are
displayed in succession.