Jadak PHOTO RESEARCH SpectraScan PR-655, Руководство пользователя

Страница: 30 / 160

PR-655/670 User Manual
14
C
HARGING THE
B
ATTERY
Note: Fully charge the battery before the initial use.
1. The PR-655/670 battery will charge whenever the AC Adapter or active USB is connected to the
instrument.
2. If you purchased the optional Rapid Charger, the time for a full charge is 3.5 to 4 hrs. To use the
charger:
a. Make sure the charger power supply is properly connected to the charger and an appropriate
AC power source. The AC input range is 100 to 240 VAC, 50
– 60 Hz.
b. The battery and charger are keyed. To insert the battery in the charger, make sure the keys are
aligned and push the battery as far forward as possible.
c. There are three status LED’s on the charger, MED, HI and MAX. Depending on the charge state
of the batter y, the LED’s will blink in succession. For example, for a fully discharged battery the
MED, HI then the MAX lights will blink one after another. For a partially charged battery, the
MED light will be solid, and the HI and MAX lights will blink etc. Once the battery is fully
charged, all three LED’s will remain steadily lit.
d. Remove the battery when fully charged.
C
ONNECTING THE
AC A
DAPTER
1. Insert the AC power cord into the AC Adapter body.
2. Insert the DC connector located on the opposite end of the adapter into the AC Adapter receptacle.
3. The P (Power) and C (Charging) status indicators should now be illuminated.
Note: The PR-655 / PR-670 can be operated using the AC Adapter while the battery is out of the instrument.