Jadak PHOTO RESEARCH SpectraScan PR-655, Руководство пользователя

Страница: 131 / 160

PR-655/670 User Manual
115
R
EMOTE
C
ONTROL
C
OMMAND
S
UMMARY
The following table summarizes all valid Remote Control commands and responses from the
PR-655/670. Detailed descriptions including parameters passed with each command are detailed in the
Commands section.
Command Description
B Sets LCD backlight level
C Clears current session instrument errors
D Downloads data from the PR-655/670
E Toggles the Echo (full duplex) mode
F Measure frequency of light source
I Requests instrument status or / error report from PR-655/670
L Defines measurement title – Maximum of 20 characters .
M
Measure command for the PR-655/670. Returned datum depends on the
accompanying parameters.
Q Quit (exit) remote mode.
R Recall stored measurement
S Set up measurement parameters
X Sets LCD contrast level.
TABLE 8 - PR-655/670 REMOTE MODE COMMAND SUMMARY
Usage:
<...> Optional Entry,
[...] Mandatory entry
(...) Comment, NOT PART OF THE COMMAND
Note: The default values, e.g. apertures, exposure time etc. are those used for the measurement before the
instrument was set to Remote Control Mode or, if in Remote Mode, the value from the previous
command.