88
88
88
88
Macro Keys
The macro keys provide a way to memorize multiple keystrokes and recall them at the touch of a button.
Macro sets can be stored and exported so you can use them on other RADAR
24 units. See O
PERATIONS
:
F
ILE
M
ANAGEMENT
: M
ACROS
for more information.
To store multiple keystrokes as a macro:
1. Press
SHIFT
and then press the
MACRO
key you wish to program on the
Session Controller
. The
MACRO
key will begin to flash.
2. Perform the sequence of keystrokes you wish to store and press the
MACRO
key once again.
3. The
MACRO
you stored is now ready for use.
QWERTY Keyboard
Both the
Session Controller
and
KC-24
remotes have keyboards that can make managing tracks and
projects a lot easier. In addition to naming tracks, projects and other data entry tasks, the keyboard keys
provide handy shortcuts to menu items. You can cycle through menu items starting with a particular letter by
pressing the corresponding key on the QWERTY keyboard. This can be a real time-saver once you get used
to it.
RADARLINK
RADARLINK allows multiple RADAR
24 units to be linked together and controlled from a single
Session
Controller
. All slaved RADAR
24 units are locked to the internal clock of the Master RADAR so that all
recordings made across multiple machines maintain a sample accurate relationship.
While in RADARLINK Mode, the following operations are available:
!
All transport functions including
PLAY,
STOP, FAST
WIND
and
JOG
/
SHUTTLE
!
Cue functions including
LOCATE
and
ENTER
TIME
!
Synchronization
!
Editing
!
System parameters and preferences
RADARLINK hookup requires standard 9-pin, male to female cables, which are available at most computer
stores.
Connect units together with the 9-pin cable running from the master unit’s
RADARLINK OUT
connector to the
RADARLINK IN
connector on the slave RADAR
24. If more slave connections are required connect the
