114
114
114
114
Enter a name using the QWERTY keyboard. Upon pressing the
ENTER
key, the new track name will appear
to the left of the track numbers in the RADARVIEW display and the dialog will automatically select the next
track number for naming. Track names can be 16 characters in length. For more information refer to
O
PERATIONS
: T
RACK
M
ANAGEMENT
: N
AMING
T
RACKS
.
RENUMBER LOCATES
This handy dialog lets you automatically renumber locates in chronological order. Selecting
RENUMBER LOCATES
and pressing the
ENTER
key presents you with the prompt:
RENUMBER ALL?
A
YES
response will renumber
locates sequentially from the beginning of the project arranging them in chronological order. A
NO
response
will cancel the renumber function.
PROJ PREFS
These project preferences define the parameters that will be used every time you create a new project.
DEF SAMPLE RATE
Sets the sample rate for newly created projects. Valid values range from 32kHz to 192 kHz,
depending on the options installed.
DEF BIT RES
This preference determines the default bit-depth or bit resolution for newly created projects.
DEF START TIME
Sets the start time that will be automatically assigned to new projects.
DEF UNDO LEVEL
This allows you to set a default undo level setting for all new projects. This setting can be changed at
any time, however setting this value to a lower value will delete any undo information that existed in
the higher undo levels. For example: changing the undo level setting from
10
to
0
and then back to
10
will erase all undo information.
DEF WAVE NS FLR
This sets the wave-drawing noise floor for all new projects.
TRACK: 01
MY FIRST TRACK
RENUMBER ALL?
NO YES
