iXBlue AR861 FSR, Руководство пользователя

Страница: 34 / 40

OCEANO HD-55 Pull & Lift – User Guide
System: HD-55 Preventive Maintenance
Sub-system : HD-55 Reference: PM05 Page: 3/3
Subject: Testing the HD-55 after closure Maintenance level: 2
Duration: 10 minutes
Part 6 - PINGER mode
Step Action
1.
Choose the PINGER ON code as the CMD code.
2.
Proceed through step 2 (use PINGER ON as command type and PRF receive
frequency) and step 3 .
Acoustic Device transmits two CAF pulses and turns into the free running acoustic
transmitter mode at PRF frequency. TT801 displays the pinger rate.
3.
End of procedure.
To switch the pinger mode off, repeat the procedure described in item 6, replacing
PINGER ON settings by PINGER OFF and Other CMD type of command. Acoustic device
should stop the free running transmitting mode.
Part 7 - DIAGNOSTIC mode
Step Action
1.
Choose the DIAGNOSTIC code as the CMD code.
2.
Go to Step 2 - TRANSMIT and RECEIVE settings of TT801 , use Telemetry command
and PRF frequency and S tep 3 .
3.
Acoustic device returns to the TT801 deck set CAF and acoustic pulses (Pulse to Pulse
modulation) to transmit information about voltage of the main battery pack and verticality
indication which are posted up on the TT801 display.
4.
End of procedure.
Vertical Position means that the main axis of the beacon housing is vertical, with the
upper Acoustic I/O endplate looking upwards.
MU-HD55P&L-AN-001 Ed. G – October 2013 26