ITT GOULDS PUMPS ICO i-FRAME, Инструкция по установке, эксплуатации и обслуживанию

Страница: 82 / 108

Figure 38: Seal chamber
Figure 39: Stuffing box cover
6.7.5 Bearings inspection
Condition of bearings
Do not reuse bearings. The condition of the bearings provides useful information on operating conditions
in the bearing frame.
Checklist
Perform these checks when you inspect the bearings:
• Inspect the bearings for contamination and damage.
• Note any lubricant condition and residue.
• Inspect the ball bearings to see if they are loose, rough, or noisy when you rotate them.
• Investigate any bearing damage to determine the cause. If the cause is not normal wear, correct
the issue before you return the pump to service.
6.8 Reassembly
6.8.1 Assemble the rotating element and bearing frame
WARNING:
Lifting and handling heavy equipment poses a crush hazard. Use caution during lifting and
handling and wear appropriate Personal Protective Equipment (PPE, such as steel-toed shoes,
gloves, etc.) at all times. Seek assistance if necessary.
CAUTION:
Risk of physical injury from hot bearings. Wear insulated gloves when using a bearing heater.
6.8 Reassembly
80 Model ICO i-FRAME, ICOH i-FRAME Installation, Operation, and Maintenance Manual