ITT GOULDS PUMPS ICO i-FRAME, Инструкция по установке, эксплуатации и обслуживанию

Страница: 97 / 108

• Serial number (order number)
• Part name
• Sectional drawing, item number
6.8.6.4 ICO assembly worksheet
"A" Determination using ITT/Goulds
K14153A gauge bars
Figure 53: Goulds gauge bar
"A" Determination using generic gauge bar
(Straight edge or other flat parallel bar)
Figure 54: Generic gauge bar
Figure 55: Cover/sleeve measurement
Step Instructional information for shim determination
1 Determine gasket type and fluid temperature - record in the provided fields.
NOTICE:
If using ITT/Goulds K14153A gauge bar kit refer to Figure
53: Goulds gauge bar on page 95 , for a generic bar see Fig-
ure 54: Generic gauge bar on page 95 .
Gasket
type:
Fluid temp:
______
_
______
_
2 Select appropriate length gauge bar to match pump features, measure height, record in
"H". H = ______
_
3 If using ITT/Goulds gauge bar K14153A kit proceed to Step 8.
4 Measure from top of bar to impeller hub feature as shown in Figure 54: Generic gauge
bar on page 95 and record in "A1" field.
A1 = ______
_
5 Measure from top of bar to casing gasket surface as shown in Figure 54: Generic
gauge bar on page 95 and record in "A2" field
NOTICE:
Casing gasket must not be installed and feature must be
clean and free of defects.
A2 = ______
_
6.8 Reassembly
Model ICO i-FRAME, ICOH i-FRAME Installation, Operation, and Maintenance Manual 95