3.5 Grout baseplate
1.
Clean areas of baseplate that will contact grout. Do not use oil-based cleaners because grout will
not bond to it. Refer to grout manufacturer's instructions.
2.
Build dam around foundation. Thoroughly wet foundation (Fig. 10).
Figure 10:
3.
Pour grout through grout hole in baseplate, up to level of dam. Remove air bubbles from grout as it
is poured by puddling, using a vibrator, or pumping the grout into place. Non-shrink grout is recom-
mended.
4.
Allow grout to set.
5.
Fill remainder of baseplate with grout. Remove air as before (Fig. 11).
Figure 11:
6.
Allow grout to set at least 48 hours.
7.
Tighten foundation bolts.
3.5.1 Alignment check
Re-check alignment before continuing, using methods previously described.
3.5 Grout baseplate
18
3196CC Installation, Operation and Maintenance Instructions
