6.2.1 Removal of impeller
WARNING:
Never apply heat to remove an impeller. The use of heat may cause an explosion due to trap-
ped fluid, resulting in severe physical injury and property damage.
WARNING:
Wear heavy work gloves when handling impellers (101) as sharp edges may cause physical
injury.
STX, MTX, & LTX
1.
Remove impeller anti-rotation nut (458Y) from front of impeller. (This part will need to be replaced
for proper sealing) (Fig. 30).
Figure 30:
2.
Spray penetrating oil through the plug hole into the cavity at the end of the shaft. Wait 15 mi-
nutes. Rotate the shaft several times while waiting to distribute the oil.
3.
Slide wrench over the shaft at location of flats (Fig. 31).
6.2 Disassembly
40
3196CC Installation, Operation and Maintenance Instructions
