6.7 Inspections
The pump parts must be inspected to the following criteria before they are reassembled to insure the
pump will run properly. Any part not meeting the required criteria should be replaced.
NOTICE:
Clean parts in solvent to remove oil, grease or dirt. Protect machined surfaces against damage
during cleaning.
6.7.1 Casing
The casing (100) should be inspected for cracks and excessive wear or pitting. It should be repaired or
replaced if it exceeds the following criteria (Fig. 41, Fig. 42, and Fig. 43).
Figure 41:
Figure 42:
6.7 Inspections
46
3196CC Installation, Operation and Maintenance Instructions
