The manuf
actur
er guar
antees only Engl
ish text a
vailable on our web si
te www
.isoil.com
MAN_MV110_EN_IT_IS_R13_1.04.XXXX
64 / 89
This function displays graphs of input Z, C. current, C. Volt, C.Load, Input 1, Input 2, Input1-Input 2, Analog to Digital
Converter.
Automatic finding of a parameter set for a generic sensor.
(POS. 12.7) OscilloSCOPe function
[ Display graphs ]
AL5
NO MCP COMMAND
(POS. 12.8) Generic sensor set
[ Gen.sens. set ]
AL5
NO MCP COMMAND
Following are the states for the PPP link and MCPI to connect the device.
PPP link status:
“UNDT” = undetermined
“DEAD” = dead, link down, persistent condition
“LCP” = LCP phase, transition condition
“AUTH” = Authentication phase, transition condition
“IPCP” = IP and DNS addressess assign phase, transition condition
“NETW” = network established (normal persistent condition when the link is UP)
“TERM” = link termination request, transition condition
MCPI link status:
“CLOSED” = socket closed
“ACCEPT” = socket awaiting for new connection
“ESTABLISH” = link established
“CLS_WAIT” = waiting for closure
“LAST_ACK” = lask ACK sent
“FIN_WAIT” = (see TCP/IP RFC documentation)
“TIME_WAIT” = (see TCP/IP RFC documentation)