The manuf
actur
er guar
antees only Engl
ish text a
vailable on our web si
te www
.isoil.com
MAN_MV110_EN_IT_IS_R13_1.04.XXXX
3 / 89
SAFETY INFORMATION
INTRODUCTION
CONVERTER
SENSOR
These operating instructions and description of device functions are provided as part of the scope of supply.
They could be modified without prior notice. The improper use, possible tampering of the instrument or parts of it and substitutions
of any components not original, renders the warranty automatically void.
The flow meter realizes a measure with liquids of conductivity greater than 5µS/cm in closed conduits, and is composed of a
converter (described in this manual) and a sensor (refer to the specific manual).
The converter could be coupled directly on the sensor (compact version) or coupled to the sensor by cable supplied with it (remote
version).
Any use other than described in this manual affects the protection provided by the manufacturer and compromises
the safety of people and the entire measuring system and is, therefore, not permitted. The manufacturer is not liable
for damaged caused by improper or non-designated use.
Transport the measuring device to the measuring point in the original packaging. Do not remove covers or caps until
immediately before installation. In case of cartons packaging it is possible to place one above the other but no more
than three cartons. In case of wooden packaging do not place one above the other.
Disposal of this product or parts of it must be carried out according to the local public or private waste collection
service regulations.
The converter must only be installed, connected and maintained by qualified and authorized specialists (e.g.
electrical technicians) in full compliance with the instructions in this Operating Instruction, the applicable norms, legal
regulations and certificates (depending on the application).
The specialists must have read and understood these Operating Instructions and must follow the instructions it
contains. The Operating Instructions provide detailed information about the converter. If you are unclear on anything
in these Operating Instructions, you must call the ISOIL service department.
