The manuf
actur
er guar
antees only Engl
ish text a
vailable on our web si
te www
.isoil.com
MAN_MV110_EN_IT_IS_R13_1.04.XXXX
4 / 89
The converter should only be installed after have verified technical data provided in these operating instructions and
on the data plate.
Specialists must take care during installation and use personal protective equipment as provided by any related
security plan or risk assessment.
Never mount or wire the converter while it is connected to the power supply and avoid any liquid contact with the
instrument’s internal components. To connect remove the terminals from the terminal block.
Before connecting the power supply check the functionality of the safety equipment.
Each part of the instrument must be examined or supplied exclusively by the manufacturer or his representative
Repairs may only be performed if a genuine spare parts kit is available and this repair work is expressly permitted.
For the cleaning of the device use only a damp cloth.
If the instrument is used in a another way than the one specified by the manufacturer, the protection provided by the
device may be compromised.
Before starting up the equipment please verify the following:
Power supply voltage must correspond to that specified on the data plate
Electric connections must be completed as described
Ground (earth) connections must be completed as specified
Verify periodically (every 3-4 months):
The power supply cables integrity, wiring and other connected electrical parts
The converter housing integrity
The suitable tightness of the sealing elements
The front panel integrity (display and keyboard)
The mechanical fixing of the converter to the pipe or wall stand
DANGER ELECTRIC SHOCK
WARNING
PRECAUTIONS
ATTENTION
SAFETY CONVENTION
