![background image](http://html1.mh-extra.com/html/uei/hub2/hub2_instruction-manual_3338294001.webp)
INSTRUCTION MANUAL
ENGLISH
Smart Temperature Split Kit
Smart Refrigerant Charging Kit
Smart Refrigerant Complete Kit
1-800-547-5740
www.ueitest.com • email: [email protected]
HUB2 / HUB4 / HUB6
WPP1
Wireless Pressure
Probe
Power
Lo-Bat
WPP1
Wireless Pressure
Probe
Power
Lo-Bat
WHP1
Wireless
Hygrometer Probe
WHP1:
Wireless Hygrometer Probe
WPP1:
Wireless Pressure Probe
WPC1:
Pipe clamp sensor
UEI HUB APP
WARNING
Read entire safety notes section regarding potential hazard and proper
instructions before using these probes. In this manual the word “
WARNING
”
is used to indicate conditions or actions that may pose physical hazards to
the user. The word “
CAUTION
” is used to indicate conditions or actions that
may damage these instrument.
WARNING
To ensure safe operation and service of these probes, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
WARNING
Maximum over pressure is: 1000 PSI.
WARNING
• Do not open these probes to replace batteries while the probes
are connected to an HVACR or other mechanical system.
• To avoid false readings, replace batteries if a low battery indicator appears.
• Do not use this these probes if they appear damaged.
• Always adhere to national and local safety codes. Use proper personal
protective equipment (PPE).
WARNING
These probes are designed for trade professionals who are familiar with the
hazards of their trade. Observe all recommended safety procedures that
include proper lockout utilization and use of personal protective equipment
that includes safety glasses, gloves and flame resistant clothing.
HUB2
2 WHP1
4 Batteries (AAA)
Carrying case
HUB4
2 WPP1
2 WPC1
4 Batteries (AA)
Carrying case
HUB6
2 WHP1
2 WPP1
2 WPC1
8 Batteries
(4x AA, 4x AAA)
Carrying case
IMPORTANT SAFETY WARNINGS
1.
Hygrometer (WHP1): Hub 2 & Hub 6
A.
Lock Button: Press to open or close probe
B
. 1/4” diameter probe.
C.
Magnetic Mount
D.
Battery Cover.
E
. Light: Blinks
GREEN
when probe is powered
on. Blinks
RED
when low battery.*
CAUTION:
Press down Lock Button to
release probe. Failure to do so may break probe
and is not covered under warranty.
GENERAL SPECIFICATIONS
Temperature Range:
32˚F to 140˚F (0˚C to 60˚C)
Temperature Accuracy:
±0.5˚F (0.3˚C)
Relative Humidity Range:
0% to 100%
Relative Humidity Resolution:
0.1%
Relative Humidity Accuracy:
±3% 20% to 80%
otherwise ±5%
Operating Temperature:
41°F to 140°F (5°C to 60°C)
Storage Temperature:
14°F to 140°F (-10°C to 60°C)
Operating Humidity:
20% RH to 80% RH
Recommended: Do Not use longer than 60
hours out of range
Dimensions:
6.84 in x 1.93 in x 1.53 in
(17.4 cm x 4.9 cm x 3.9 cm)
Item Weight:
4.4 oz (125 gr)
Certification:
CE Conformity, FCC/IC
Battery Type:
(AAA) 2
Battery Life:
100+ hours
* NOTE:
Low battery indicator is also in the
“Tool Connection” screen
WHP1 OVERVIEW
WHP1
Wireless
Hygrometer Probe
WHP1
Wireless
Hygrometer Probe
2.
Pressure Probe (WPP1): Hub 4 & Hub 6
A.
Cable connector plug-in: for connecting the
pipe clamp sensor (WPC1).
B.
Battery cover
C.
Light: Blinks
GREEN
when probe is powered
on and blinks
RED
when low battery.*
D.
Power Button: Hold for one second to
power on
E.
1/4”pressure connector
F.
1/4” pass-through connector
*NOTE:
Low battery indicator is in the “Tool
Connection” screen
GENERAL SPECIFICATIONS
Range:
0 to 725 PSIg
Resolution:
0.1 PSI
Accuracy:
0.5% F.S. (at 25˚C ±3˚C) Total 1% F.S.
32˚F to 158˚F (0˚C to 70˚C)
Operating Temperature:
14°F to 158°F
(-10°C to 70°C)
Storage Temperature:
14°F to 140°F
(-10°C to 60°C)
Operating Humidity:
30% RH to 85% RH
Over-range:
1000 PSI
Dimensions:
6.70 in x 1.56 in x 1.44 in
(17 cm x 4 cm x 3.7 cm)
Item Weight:
7.4 oz (210 gr)
Certification:
CE Conformity, FCC/IC
Battery Type:
(AA) 2
Battery Life:
100+ hours
3. Pipe clamp sensor (WPC1): Hub 4 & Hub 6
A.
Temperature sensor
B.
Cable connector plug-in: for connecting
WPC1 to the WPP1.
NOTE:
Maximum pipe diameter is 1.5 in. (3.8cm)
GENERAL SPECIFICATIONS
Range:
32˚F to 176˚F (0˚C to 80˚C)
Resolution:
0.1˚F
Accuracy:
±(0.6˚F (0.3˚C))
Response Time:
<30 sec.
Operating Temperature:
-40°F to 185°F
(-40°C to 85°C)
Storage Temperature:
14°F to 140°F (-10°C to 60°C)
Dimensions:
5.66 in x 3.81 in x 1.10 in
(14.4 cm x 9.7 cm x 2.8 cm)
Item Weight:
2.1 oz (60 gr)
Certification:
CE Conformity, FCC/IC
A.
Home Screen:
Refrigerant Side
A.
Home Screen:
Air Side
UEi HUB OVERVIEW
B.
B.
A.
A.
C.
E.
D.
A.
B.
C.
D.
E.
F.
WPP1 OVERVIEW
WPC1 OVERVIEW
A. Suction Line Pressure
B. Suction Line Temperature
C. Refrigerant Favorites (tap to view)
D. Liquid Line Pressure
E. Liquid Line Temperature
F. Refrigerant List (tap to view)
G. Air Side Screen (tap or swipe
left to view)
H. Vapor Saturation Temperature
I. Liquid Saturation Temperature
A. Refrigerant Side Screen (tap or
swipe right to view)
B. Delta T
C. Target Delta T (assumes
400 CFM/ton)
D. Return Dry Bulb Temperature
E. Return Wet Bulb Temperature
F. Return and Supply Calculations
(tap to view)
G. Supply Dry Bulb Temperature
H. Supply Wet Bulb Temperature
Hub
Refrigerant Side
Air Side
Line Pressure
Line Temp
select tool
select tool
Suction
--.--°F
Vapor
Saturation
--.--°F
Superheat
Line Pressure
Line Temp
select tool
select tool
Liquid
--.--°F
Liquid
Saturation
--.--°F
Subcooling
R507A
Hub
Refrigerant Side
Air Side
Line Pressure
Line Temp
select tool
select tool
Suction
--.--°F
Vapor
Saturation
--.--°F
Superheat
Line Pressure
Line Temp
select tool
select tool
Liquid
--.--°F
Liquid
Saturation
--.--°F
Subcooling
R507A
A.
F.
G.
I.
H.
B.
C.
D.
E.
Hub
Refrigerant Side
Air Side
--.--°F
Delta T
--.--°F
Target Delta T
Supply Dry Bulb
Supply Wet Bulb
select tool
select tool
Return Dry Bulb
Return Wet Bulb
select tool
select tool
G.
F.
B.
A.
C.
D.
E.
H.
•
Remove battery cover.
•
Replace the old batteries with 2 new
(AAA) batteries.
•
Replace the battery cover.
Screw
Battery level
are displayed in the
tool connection screen to the right of each
probe connected.
• Remove battery cover.
• Replace the old batteries with 2 new
(AA) batteries.
• Replace the battery cover.
Battery level
are displayed in the tool
connection screen to the right of each
probe connected.
Caution
: Take care not to lose the screws when
opening battery compartments
Caution
: Take care not to lose the screws when
opening battery compartments
Hub
Refrigerant Side
Air Side
Line Pressure
Line Temp
select tool
select tool
Suction
--.--°F
Vapor
Saturation
--.--°F
Superheat
Line Pressure
Line Temp
select tool
select tool
Liquid
--.--°F
Liquid
Saturation
--.--°F
Subcooling
R507A