
Chapter 4 — Configuring Print Engine and Media Settings
PA30 Print Engine User’s Manual
65
3
Enter values in the entry fields, or choose settings from the
drop-down lists. For more information, see the next table.
4
Click
Submit Setup
. The changes are saved.
Print Engine Settings Descriptions
Setting
Description
STARTADJ
(Start Adjust)
Amount of media (in dots) that is either fed out
or pulled back before printing begins. A positive
Start Adjust value feeds media out and a negative
value pulls media back. Default is 0.
STOPADJ
(Stop Adjust)
Amount of media (in dots) that is fed out or
pulled back after printing is completed. A positive
Stop Adjust value increases the normal media feed
and a negative Stop Adjust value decreases the
normal media feed. Default is 0.
HEAD RESIST
(Read-only) H
ead resistance value for the
installed printhead.
PRINT SPEED
Sets the desired printing speed in inches per
second (ips). Set the print speed to a value
appropriate for your media. For more
information, see
“Media Type Settings” on
page 71.
CLIP DEFAULT
Enables or disables printing of partial fields.
Partial fields are print fields that have been
configured larger than the print window and will
be truncated if Clip Default is enabled.
Содержание PA30
Страница 1: ...PA30 Print Engine User s Manual...
Страница 60: ...Chapter 2 Using the PA30 in an Applicator 48 PA30 Print Engine User s Manual...
Страница 74: ...Chapter 3 Configuring Communication Settings 62 PA30 Print Engine User s Manual...
Страница 135: ...PA30 Print Engine User s Manual 123 I Index...