Intermec PA30, Руководство пользователя, Страница: 50 / 143

Chapter 2 — Using the PA30 in an Applicator
38 PA30 Print Engine User’s Manual
Pause
Toggles between Pause mode and printing. Not supported by S-
Style.
Reprint
Reprints the last valid label.
Apperr1
Applicator error 1.
Apperr2
Applicator error 2.
Apperr3
Applicator error 3.
RTWINEXT
External input signal for the Ready-to-Work indicator, which you
can use to monitor the operational status of the entire system.
About PA30 Out Signals
This section describes the PA30 out signals.
Data Ready
Asserted when the PA30 is ready to receive a startprint signal and
execute the current print job. De-asserted when the print cycle
ends. Not supported by S-Style.
Endprint
Asserted during or after a print cycle. The endprint signal also
behaves differently depending on the applicator port endprint
mode. When the startprint signal is received, the endprint signal
may or may not be asserted.
There are five options to choose from:
• Off: Endprint signal is never asserted.
• Mode 1 (Z-Style)/Type 3 (S-Style): Asserted low during
print/feed cycle.
• Mode 2 (Z-Style)/Type 4 (S-Style): Asserted high during
print/feed cycle.
Note: Unless described otherwise, all out signals are asserted low
and de-asserted high.