Intermec PA30, Руководство пользователя, Страница: 31 / 143

Chapter 1 — Learning About the PA30
PA30 Print Engine User’s Manual 19
4
Press the down arrow key. Media: Media Size appears in the
display.
5
Press the right arrow key several times until you see this text in
the display:
6 Press the down arrow and then press Enter . The PA30 feeds
out labels until the firmware has determined the best position
for the media.
7 Press Setup to exit Setup mode.
Loading Ribbon
The PA30 can print on labels, tickets, tags, and continuous stock
using thermal transfer printing with a special ink-coated ribbon.
The PA30 can use transfer ribbon rolls wound with the ink-
coated side facing either outward or inward. Illustrations in this
section show the ink-coated side facing inward, and media is
omitted from the illustrations for clarity.
To load thermal transfer ribbon
1
Open the PA30 access door.
Note: By default, the PA30 is configured to use an 83-mm
diameter ribbon. To use larger diameter ribbon (such as 90-mm),
you need to send the SYSVAR(53)=90 Fingerprint command to
the PA30.
For more information on using Fingerprint with the PA30, see
“Programming Applications for the PA30” on page 40.
For more information on all Fingerprint commands, see the
Intermec Fingerprint v8.xx Programmer’s Reference Manual .