Intermec PA30, Руководство пользователя, Страница: 48 / 143

Chapter 2 — Using the PA30 in an Applicator
36 PA30 Print Engine User’s Manual
Ribbonlow Enables or disables the PA30 low ribbon alert message.
For more information, see
“Ribbon Low” on page 39.
Reprint Enables or disables reprinting the last label sent to the
printer (by using the Reprint in signal). For more
information, see
“Reprint” on page 38.
RTW Configures the Ready-to-Work indicator on the PA30
front panel. Asserting this signal turns the Ready-to-
Work indicator on (steady blue). Choose from:
• Mode 1 - Signal is asserted low when no events are
active in the System Health Monitor (SHM).
• Mode 2 - Signal is asserted low when the printer
motor is idle.
• Mode 3 - Signal is asserted low when the printer
motor is idle and no events are active in the SHM.
For more information, see “RTWOUTEXT” on
page 39.
DC 5V Configures the PA30 to use either its internal power
supply or an external supply (connected to the External
Power port) to p5VDC to the
Z-Style and S-Style ports.
DC 24V Configures the PA30 to use either its internal power
supply or an external supply (connected to the External
Power port) to p24VDC to the Z-Style and S-
Style ports.
In Signals (Read-only) Shows the current state of the 8 in signals,
from left (lowest numbered port) to right. 0 indicates
low, 1 indicates high.
For more information, see
“About PA30 In Signals” on
page 37.
Applicator Port Settings Descriptions (continued)
Setting Description